Moly Magic, 4oz

Moly Magic™ is an exclusive Bore Tech product and the only cleaner in the industry formulated specifically to assist in the removal of moly fouling/buildup in rifle bores. The unique blend of penetrants and surfactants allows the Moly Magic to quickly and effectively neutralize harmful corrosives and remove stubborn moly fouling.

Bore Tech’s Moly Magic™ is the only cleaner in the industry that is formulated exclusively for the removal of molybdenum disulfide (commonly referred to as “moly”) fouling in rifle bores.

Moly Magic uses a sophisticated formulation that allows it to penetrate underneath of the moly fouling and deep into the barrel’s pores. This action loosens the moly fouling from the bore and allows the specially formulated surfactant system to suspend and attract the moly particles to the patch with electrostatic force. This 2 step process greatly increases the cleaning efficiency. Moly Magic also contains powerful surfactants that neutralize strong corrosives found within moly fouling.

MOLY MAGIC IS 100%

MOLY MAGIC IS NOT A BORE CLEANER.
Moly Magic should be used in conjunction with a bore cleaner like Bore Tech Eliminator Bore Cleaner to achieve proper cleaning results.

MOLY MAGIC

Volume	4 fl oz
Bottle Type	Treated HDPE Plastic
Cap Type	Twist Open/Close Dispensing Cap w/ foam gasket seal

100% Barrel Safe
Odor Free
Non-Hazardous
100 % Biodegradable
Contains No Ammonia
Short Term Rust Preventative
Non-Flammable

Chemical Selection Guide

Bore Tech Moly Magic Use Instructions

UNLOAD FIREARM

1) First, clean bore with Bore Tech EliminatorTM Bore Cleaner, following its recommended procedure.

2) Next, wet 3 to 4 Bore Tech X Count patches with Moly Magic and individually push through bore.

3) Next, make 10 to 15 passes with a tight fitting Bore Tech brush saturated with Moly Magic.

4) Repeat Step 2 and let Moly Magic soak for 10 to 15 minutes. For badly fouled rifles, extended soak times may be needed. Moly Magic can be safely left in the bore overnight.

5) Finally, push dry patches through the bore until they come out clean.

6) Repeat Steps 1-5 if necessary.

7) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.

8) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.